dry bath incubator

Features 1. LCD display. It easy to setup and use 2. Simultaneous display of set and actual time, temprature 3. As it is equipped with various optional blocks, the instrument can adapt to different tubes & wells to cope with experimental needs. Tt is easy to replace the metalblocks and is very simple to clean and sterilize. Customized blocks are available to suit your specific demands 4. Reliable design with inner extra temperature protection 5. Heave of the block makes block change easy and convenient 6. Temperature deflection adjusting meet with different demands 7. Microprocessor controlled incubation time and temperature. 8. Beep-signal / Stop after program completion 9. Conforms to CE safty standard Specification 1. Temp. Control Range:-10oC 100oC 2. Timing Range:1min 99h59min 3. Temp. Control Accuracy: ≤±0.3oC 4..Display Accuracy: 0.1oC 5. Heating Time: ≤15min (from 20oC to 100oC) 6. Cooling Time:≤20min (from 20oC to -5oC) If the room temperature is lower 30 ≤30min (from 20oC to -10oC) If the room temperature is lower 25oC 7. Heating and Cooling Parts: TE Module 8. Dimension (LxWxH): 300x220x170 mm 9. Net Weight: 5Kg 10. Standard Blocks: See " Dry Bath Blocks for MK-20" Dry Bath Blocks for MK-20 Type ParameterMax. TempMin. TempA96×0.2ml PCR plate100-10B54×0.5ml100-10C35×1.5ml100-10D35×2.0ml100-10E15×0.5ml+20×1.5ml100-10F24×Dia.≤φ12mm tube1000G12×15ml Falcon tube1000H6×50ml Falcon tube1000I103×67×30 Water bath block1000J96×0.2ml plate100-10